cpp/openttd-patchpack/source Changeset - r11911:68c886dabb52

Changeset - r11911:68c886dabb52

Parent rev.

Child rev.

[Not reviewed]

master

0 9 0

rubidium - 15 years ago 2009-05-16 12:36:33
rubidium@openttd.org

(svn r16318) -Change: use !! instead of @@ in src/*.in too.
-Change: use @ instead of ~ in configure/Makefiles so Debian's build system(s) can also build RC binaries.

9 files changed with 112 insertions and 112 deletions:

Makefile.in

Makefile.msvc

Makefile.src.in

config.lib

configure

findversion.sh

projects/determineversion.vbs

src/ottdres.rc.in

src/rev.cpp.in

0 comments (0 inline, 0 general)

Makefile.in

➞

Show inline comments

@@ @@ -72,49 +72,49 @@ help: @@
 	@echo "  run-gdb       execute openttd in debug mode after the compilation"
 	@echo "  run-prof      execute openttd in profiling mode after the compilation"
 	@echo "Installation:"
 	@echo "  install       install the compiled files and the data-files after the compilation"
 	@echo "  bundle        create the base for an installation bundle"
 	@echo "  bundle_zip    create the zip installation bundle"
 	@echo "  bundle_gzip   create the gzip installation bundle"
 	@echo "  bundle_bzip2  create the bzip2 installation bundle"
 	@echo "  bundle_lha    create the lha installation bundle"
 	@echo "  bundle_dmg    create the dmg installation bundle"
 config.pwd: $(CONFIG_CACHE_PWD)
 	$(MAKE) reconfigure
 config.cache: $(CONFIG_CACHE_SOURCE_LIST) $(CONFIGURE_FILES)
 	$(MAKE) reconfigure
 reconfigure:
 ifeq ($(shell if test -f config.cache; then echo 1; fi), 1)
 	@echo "----------------"
 	@echo "The system detected that source.list or any configure file is altered."
 	@echo " Going to reconfigure with last known settings..."
 	@echo "----------------"
 # Make sure we don't lock config.cache
-	@$(shell cat config.cache | sed 's~\\ ~\\\\ ~g') || exit 1
+	@$(shell cat config.cache | sed 's@\\ @\\\\ @g') || exit 1
 	@echo "----------------"
 	@echo "Reconfig done. Please re-execute make."
 	@echo "----------------"
 else
 	@echo "----------------"
 	@echo "Have not found a configuration, please run configure first."
 	@echo "----------------"
 	@exit 1
 endif
 clean:
 	@for dir in $(DIRS); do \
 		$(MAKE) -C $$dir clean; \
 	done
 	$(Q)rm -rf $(BUNDLE_TARGET)
 lang:
 	@for dir in $(LANG_DIRS); do \
 		$(MAKE) -C $$dir all; \
 	done
 mrproper:
 	@for dir in $(DIRS); do \
 		$(MAKE) -C $$dir mrproper; \

Makefile.msvc

➞

Show inline comments

+#
 # Makefile for creating bundles of MSVC's binaries in the same way as we make
 # the zip bundles for ALL other OSes.
+#
 # Usage: make -f Makefile.msvc PLATFORM=[Win32|x64] BUNDLE_NAME=openttd-<version>-win[32|64]
 #   or   make -f Makefile.msvc PLATFORM=[Win32|x64] BUNDLE_NAME=OTTD-win[32|64]-nightly-<revision>
+#
 # Check if we want to show what we are doing
 ifdef VERBOSE
 	Q =
 else
 	Q = @
 endif
 AWK = "awk"
 ROOT_DIR := $(shell pwd)
 BIN_DIR = "$(ROOT_DIR)/bin"
 SRC_DIR = "$(ROOT_DIR)/src"
 BUNDLE_DIR = "$(ROOT_DIR)/bundle"
 BUNDLES_DIR = "$(ROOT_DIR)/bundles"
 TTD = "openttd.exe"
-TARGET := $(shell echo $(PLATFORM) | sed "s~win64~x64~;s~win32~Win32~")
+TARGET := $(shell echo $(PLATFORM) | sed "s@win64@x64@;s@win32@Win32@")
 all:
 	$(Q)cp objs/$(TARGET)/Release/$(TTD) $(BIN_DIR)/$(TTD)
 include Makefile.bundle.in

Makefile.src.in

➞

Show inline comments

@@ @@ -37,210 +37,210 @@ CONFIG_CACHE_SOURCE = $(SRC_OBJS_DIR)/ @@
 CONFIG_CACHE_VERSION  = $(SRC_OBJS_DIR)/!!CONFIG_CACHE_VERSION!!
 OBJS_C   := !!OBJS_C!!
 OBJS_CPP := !!OBJS_CPP!!
 OBJS_MM  := !!OBJS_MM!!
 OBJS_RC  := !!OBJS_RC!!
 OBJS     := $(OBJS_C) $(OBJS_CPP) $(OBJS_MM) $(OBJS_RC)
 SRCS     := !!SRCS!!
 # All C-files depend on those 3 files
 FILE_DEP := $(CONFIG_CACHE_COMPILER) endian_target.h
 # Create all dirs and subdirs
 RES      := $(shell mkdir -p $(BIN_DIR) $(sort $(dir $(OBJS))))
 # Make sure endian_target.h is reasable as if it was in the src/ dir
 CFLAGS += -I $(SRC_OBJS_DIR) -I $(LANG_OBJS_DIR)
 CFLAGS_MAKEDEP += -I $(SRC_OBJS_DIR) -I $(LANG_OBJS_DIR) -I $(SCRIPT_SRC_DIR)
 ENDIAN_TARGETS := endian_target.h $(ENDIAN_CHECK)
 # This 'sed' basicly just removes 'const' from the line if it is a 2+D array
 # For more information, please check:
 #  http://maillist.openttd.org/pipermail/devs/2007-April/000284.html
 #  http://maillist.openttd.org/pipermail/devs/2007-February/000248.html
-GCC295_FIX=sed -r 's~^(\t*)(.*)( const )([A-Za-z0-9_ ]+(\[.*\]){2,})(( = \{)|(;))(.*)$$~\1\2 \4\6\8\9~g'
+GCC295_FIX=sed -r 's@^(\t*)(.*)( const )([A-Za-z0-9_ ]+(\[.*\]){2,})(( = \{)|(;))(.*)$$@\1\2 \4\6\8\9@g'
 # This 'sed' removes the 3rd '4' in the # lines of the -E output of
 #  gcc 2.95.3 and lower, as it should indicate that it is a C-linkage, but the
 #  compiler can't handle that information (just don't ask). So we remove it
 #  and then it compiles happily and without bitching :)
 # Furthermore gcc 2.95 has some trouble with protected and private when
 #  accessing the protected/private stuff of the enclosing class (or the
 #  super class of the enclosing class).
-GCC295_FIX_2=sed -e 's~\(^\# [0-9][0-9]* "[^"]*"[ 0-9]*\) 4$$~\1~g;s~private:~public:~g;s~protected:~public:~g'
+GCC295_FIX_2=sed -e 's@\(^\# [0-9][0-9]* "[^"]*"[ 0-9]*\) 4$$@\1@g;s@private:@public:@g;s@protected:@public:@g'
 # Check if we want to show what we are doing
 ifdef VERBOSE
 	Q =
 	E = @true
 else
 	Q = @
 	E = @echo
 endif
 # Our default target
 all: $(BIN_DIR)/$(TTD)
 # This are 2 rules that are pointing back to STRGEN stuff.
 #  There is not really a need to have them here, but in case
 #  some weirdo wants to run 'make' in the 'src' dir and expects
 #  the languages to be recompiled, this catches that case and
 #  takes care of it nicely.
 $(LANG_OBJS_DIR)/$(STRGEN):
 	$(MAKE) -C $(LANG_OBJS_DIR) $(STRGEN)
 $(LANG_OBJS_DIR)/table/strings.h: $(LANG_DIR)/english.txt $(LANG_OBJS_DIR)/$(STRGEN)
 	$(MAKE) -C $(LANG_OBJS_DIR) table/strings.h
 # Always run version detection, so we always have an accurate modified
 # flag
 VERSIONS := $(shell AWK="$(AWK)" "$(ROOT_DIR)/findversion.sh")
 MODIFIED := $(shell echo "$(VERSIONS)" | cut -f 3 -d'	')
 ifdef REVISION
 # Use specified revision (which should be of the form "r000").
 REV := $(REVISION)
-REV_NR := $(shell echo $(REVISION) | sed "s~[^0-9]~~g")
+REV_NR := $(shell echo $(REVISION) | sed "s@[^0-9]@@g")
 else
 # Use autodetected revisions
 REV      := $(shell echo "$(VERSIONS)" | cut -f 1 -d'	')
 REV_NR   := $(shell echo "$(VERSIONS)" | cut -f 2 -d'	')
 endif
 # Make sure we have something in REV and REV_NR
 ifeq ($(REV),)
 REV := norev000
 endif
 ifeq ($(REV_NR),)
 REV_NR := 0
 endif
 # This helps to recompile if flags change
 RES := $(shell if [ "`cat $(CONFIG_CACHE_COMPILER) 2>/dev/null`" != "$(CC_CFLAGS) $(CFLAGS)" ]; then echo "$(CC_CFLAGS) $(CFLAGS)" > $(CONFIG_CACHE_COMPILER); fi )
 RES := $(shell if [ "`cat $(CONFIG_CACHE_LINKER) 2>/dev/null`" != "$(LDFLAGS) $(LIBS)" ]; then echo "$(LDFLAGS) $(LIBS)" > $(CONFIG_CACHE_LINKER); fi )
 RES := $(shell if [ "`cat $(CONFIG_CACHE_ENDIAN) 2>/dev/null`" != "$(ENDIAN_FORCE)" ]; then echo "$(ENDIAN_FORCE)" > $(CONFIG_CACHE_ENDIAN); fi )
 # If there is a change in the source-file-list, make sure we recheck the deps
 RES := $(shell if [ "`cat $(CONFIG_CACHE_SOURCE) 2>/dev/null`" != "$(SRCS)" ]; then echo "$(SRCS)" > $(CONFIG_CACHE_SOURCE); fi )
 # If there is a change in the revision, make sure we recompile rev.cpp
 RES := $(shell if [ "`cat $(CONFIG_CACHE_VERSION) 2>/dev/null`" != "$(REV) $(MODIFIED)" ]; then echo "$(REV) $(MODIFIED)" > $(CONFIG_CACHE_VERSION); fi )
 ifndef MAKEDEPEND
 # The slow, but always correct, dep-check
 DEP_MASK := %.d
 DEPS     := $(OBJS:%.o=%.d)
 # Only include the deps if we are compiling everything
 ifeq ($(filter $(ENDIAN_TARGETS) %.o clean mrproper, $(MAKECMDGOALS)),)
 -include $(DEPS)
 else
 # In case we want to compile a single target, include the .d file for it
 ifneq ($(filter %.o, $(MAKECMDGOALS)),)
 SINGLE_DEP := $(filter %.o, $(MAKECMDGOALS))
 -include $(SINGLE_DEP:%.o=%.d)
 endif
 endif
 # Find the deps via GCC. Rarely wrong, but a bit slow
 $(OBJS_C:%.o=%.d): %.d: $(SRC_DIR)/%.c $(FILE_DEP)
 	$(E) '$(STAGE) DEP $(<:$(SRC_DIR)/%.c=%.c)'
-	$(Q)$(CC_HOST) $(CC_CFLAGS) $(CFLAGS) -MM $< | sed 's~^$(@F:%.d=%.o):~$@ $(@:%.d=%.o):~' > $@
+	$(Q)$(CC_HOST) $(CC_CFLAGS) $(CFLAGS) -MM $< | sed 's@^$(@F:%.d=%.o):@$@ $(@:%.d=%.o):@' > $@
 $(OBJS_CPP:%.o=%.d): %.d: $(SRC_DIR)/%.cpp $(FILE_DEP)
 	$(E) '$(STAGE) DEP $(<:$(SRC_DIR)/%.cpp=%.cpp)'
-	$(Q)$(CXX_HOST) $(CFLAGS) -MM $< | sed 's~^$(@F:%.d=%.o):~$@ $(@:%.d=%.o):~' > $@
+	$(Q)$(CXX_HOST) $(CFLAGS) -MM $< | sed 's@^$(@F:%.d=%.o):@$@ $(@:%.d=%.o):@' > $@
 $(OBJS_MM:%.o=%.d): %.d: $(SRC_DIR)/%.mm $(FILE_DEP)
 	$(E) '$(STAGE) DEP $(<:$(SRC_DIR)/%.mm=%.mm)'
-	$(Q)$(CC_HOST) $(CFLAGS) -MM $< | sed 's~^$(@F:%.d=%.o):~$@ $(@:%.d=%.o):~' > $@
+	$(Q)$(CC_HOST) $(CFLAGS) -MM $< | sed 's@^$(@F:%.d=%.o):@$@ $(@:%.d=%.o):@' > $@
 $(OBJS_RC:%.o=%.d): %.d: $(SRC_DIR)/%.rc $(FILE_DEP)
 	$(E) '$(STAGE) DEP $(<:$(SRC_DIR)/%.mm=%.mm)'
 	$(Q)touch $@
 else
 # The much faster, but can be wrong, dep-check
 DEP_MASK :=
 DEPS     := Makefile.dep
 # Only include the deps if we are not cleaning
 ifeq ($(filter $(ENDIAN_TARGETS) depend clean mrproper, $(MAKECMDGOALS)),)
 -include Makefile.dep
 endif
 ifeq ("$(SRC_OBJS_DIR)/$(DEPEND)","$(MAKEDEPEND)")
 DEP := $(MAKEDEPEND)
 $(SRC_OBJS_DIR)/$(DEPEND): $(SRC_DIR)/depend/depend.cpp
 	$(E) '$(STAGE) Compiling and linking $(DEPEND)'
 	$(Q)$(CXX_HOST) -o $@ $<
 endif
 # Make sure that only 'make depend' ALWAYS triggers a recheck
 ifeq ($(filter depend, $(MAKECMDGOALS)),)
 Makefile.dep: $(FILE_DEP) $(SRCS:%=$(SRC_DIR)/%) $(CONFIG_CACHE_SOURCE) $(DEP)
 else
 Makefile.dep: $(DEP) FORCE
 endif
 	$(E) '$(STAGE) DEP CHECK (all files)'
 	$(Q)rm -f Makefile.dep.tmp
 	$(Q)touch Makefile.dep.tmp
 # Calculate the deps via makedepend
 	$(Q)$(MAKEDEPEND) -f$(SRC_OBJS_DIR)/Makefile.dep.tmp -o.o -Y -v -- $(CFLAGS_MAKEDEP) -- $(SRCS:%=$(SRC_DIR)/%) 2>/dev/null
 # Convert x:/... paths to /x/... for mingw
 ifeq ($(OS), MINGW)
-	@cat Makefile.dep.tmp | sed 's~\([a-zA-Z]\):\/~\/\1\/~g' > Makefile.dep.tmp.mingw
+	@cat Makefile.dep.tmp | sed 's@\([a-zA-Z]\):\/@\/\1\/@g' > Makefile.dep.tmp.mingw
 	@cp Makefile.dep.tmp.mingw Makefile.dep.tmp
 	@rm -f Makefile.dep.tmp.mingw
 endif
 # Remove all comments and includes that don't start with $(SRC_DIR)
 # Remove $(SRC_DIR) from object-file-name
 	@$(AWK) '                           \
 	/^# DO NOT/ { print $$0 ; next}     \
 	/^#/ {next}                         \
 	/:/ {                               \
 		left = NF - 1;                    \
 		for (n = 2; n <= NF; n++) {       \
 			if (match($$n, "^$(ROOT_DIR)") == 0) { \
 				$$n = "";                     \
 				left--;                       \
 			}                               \
 		}                                 \
 		gsub("$(SRC_DIR)/", "", $$1);     \
 		if (left > 0) {                   \
 			print $$0;                      \
 			$$1 = "Makefile.dep:";          \
 			print $$0;                      \
 		}                                 \
 		next                              \
 	}                                   \
 	{                                   \
 		print $$0                         \
 	}                                   \
-	' < Makefile.dep.tmp | sed 's~  *~ ~g;s~ $$~~' | $(SORT) > Makefile.dep
+	' < Makefile.dep.tmp | sed 's@  *@ @g;s@ $$@@' | $(SORT) > Makefile.dep
 	$(Q)rm -f Makefile.dep.tmp Makefile.dep.tmp.bak
 endif
 # Avoid problems with deps if a .h/.hpp/.hpp.sq file is deleted without the deps
 #  being updated. Now the Makefile continues, the deps are recreated
 #  and all will be fine.
 %.h %.hpp %.hpp.sq:
 	@true
 # Compile all the files according to the targets
 $(OBJS_C): %.o: $(SRC_DIR)/%.c $(DEP_MASK) $(FILE_DEP)
 	$(E) '$(STAGE) Compiling $(<:$(SRC_DIR)/%.c=%.c)'
 	$(Q)$(CC_HOST) $(CC_CFLAGS) $(CFLAGS) -c -o $@ $<
 $(OBJS_CPP): %.o: $(SRC_DIR)/%.cpp $(DEP_MASK) $(FILE_DEP)
 	$(E) '$(STAGE) Compiling $(<:$(SRC_DIR)/%.cpp=%.cpp)'
 ifeq ($(GCC295), 1)
 	$(Q)$(CXX_HOST) -E $(CFLAGS) $< | $(GCC295_FIX) | $(GCC295_FIX_2) | $(CXX_HOST) $(CFLAGS) -c -o $@ -x c++ -
 else
 	$(Q)$(CXX_HOST) $(CFLAGS) -c -o $@ $<
@@ @@ -267,44 +267,44 @@ ifeq ($(OS), PSP) @@
 else
 	$(Q)$(CXX_HOST) $(LDFLAGS) $(OBJS) $(LIBS) -o $@
 endif
 ifdef STRIP
 	$(Q)$(STRIP) $@
 ifeq ($(OS), DOS)
 	$(E) '$(STAGE) Adding CWSDPMI stub to $@'
 	$(Q)$(ROOT_DIR)/os/dos/make_dos_binary_selfcontained.sh $(SRC_OBJS_DIR)/$@
 endif
 endif
 # The targets to compile the endian-code
 endian_target.h: $(ENDIAN_CHECK) $(CONFIG_CACHE_ENDIAN)
 	$(E) '$(STAGE) Testing endianness for target'
 	$(Q)./$(ENDIAN_CHECK) $(ENDIAN_FORCE) > $@
 $(ENDIAN_CHECK): $(SRC_DIR)/endian_check.cpp
 	$(E) '$(STAGE) Compiling and Linking $@'
 	$(Q)$(CXX_BUILD) $(CFLAGS_BUILD) $< -o $@
 # Revision files
 $(SRC_DIR)/rev.cpp: $(CONFIG_CACHE_VERSION) $(SRC_DIR)/rev.cpp.in
-	$(Q)cat $(SRC_DIR)/rev.cpp.in      | sed "s~@@REVISION@@~$(REV_NR)~g;s~@@VERSION@@~$(REV)~g;s~@@MODIFIED@@~$(MODIFIED)~g;s~@@DATE@@~`date +%d.%m.%y`~g" > $(SRC_DIR)/rev.cpp
+	$(Q)cat $(SRC_DIR)/rev.cpp.in      | sed "s@\!\!REVISION\!\!@$(REV_NR)@g;s@!!VERSION!!@$(REV)@g;s@!!MODIFIED!!@$(MODIFIED)@g;s@!!DATE!!@`date +%d.%m.%y`@g" > $(SRC_DIR)/rev.cpp
 $(SRC_DIR)/ottdres.rc: $(CONFIG_CACHE_VERSION) $(SRC_DIR)/ottdres.rc.in
-	$(Q)cat $(SRC_DIR)/ottdres.rc.in | sed "s~@@REVISION@@~$(REV_NR)~g;s~@@VERSION@@~$(REV)~g;s~@@DATE@@~`date +%d.%m.%y`~g" > $(SRC_DIR)/ottdres.rc
+	$(Q)cat $(SRC_DIR)/ottdres.rc.in | sed "s@\!\!REVISION\!\!@$(REV_NR)@g;s@!!VERSION!!@$(REV)@g;s@!!DATE!!@`date +%d.%m.%y`@g" > $(SRC_DIR)/ottdres.rc
 FORCE:
 depend: $(DEPS)
 clean:
 	$(E) '$(STAGE) Cleaning up object files'
 	$(Q)rm -f $(DEPS) $(OBJS) $(TTD) $(DEPEND) $(TTD:%=$(BIN_DIR)/%) $(CONFIG_CACHE_COMPILER) $(CONFIG_CACHE_LINKER) $(CONFIG_CACHE_ENDIAN) $(CONFIG_CACHE_SOURCE) $(ENDIAN_TARGETS)
 mrproper: clean
 	$(Q)rm -f $(SRC_DIR)/rev.cpp $(SRC_DIR)/ottdres.rc
 %.o:
 	@echo '$(STAGE) No such source-file: $(@:%.o=%).[c|cpp|mm|rc]'
 .PHONY: all mrproper depend clean FORCE

config.lib

➞

Show inline comments

@@ @@ -400,49 +400,49 @@ detect_params() { @@
 				fi
 				;;
 		esac
 	done
 	if [ -n "$prev_p" ]; then
 		log 1 "configure: error: missing argument to --$prev_p"
 		exit 1
 	fi
 	# Clean the logfile
 	echo "" > $config_log
+}
 save_params() {
 	# Here we save all params, so we can later on do an exact redo of this
 	#  configuration, without having the user to re-input stuff
 	echo "Running configure with following options:" >> $config_log
 	echo "" >> $config_log
 	configure="$CONFIGURE_EXECUTABLE --ignore-extra-parameters"
 	for p in $save_params_array; do
 		eval "v=\"\$$p\""
-		p=`echo "$p" | sed 's~_~-~g;s~\n~~g;s~ ~\\ ~g'`
+		p=`echo "$p" | sed 's@_@-@g;s@\n@@g;s@ @\\ @g'`
 		# Only save those params that aren't empty
 		configure="$configure --$p=\"$v\""
 	done
 	echo "$configure" >> $config_log
 	echo "$configure" > config.cache
 	echo "" >> $config_log
+}
 check_params() {
 	# Some params want to be in full uppercase, else they might not work as
 	# expected.. fix that here
 	endian=`echo $endian | tr '[a-z]' '[A-Z]'`
 	os=`echo $os | tr '[a-z]' '[A-Z]'`
 	cpu_type=`echo $cpu_type | tr '[a-z]' '[A-Z]'`
 	# Check if all params have valid values
 	# Endian only allows AUTO, LE and, BE
 	if [ -z "`echo $endian | egrep '^(AUTO|LE|BE|PREPROCESSOR)$'`" ]; then
 		log 1 "configure: error: invalid option --endian=$endian"
 		log 1 " Available options are: --endian=[AUTO|LE|BE]"
 		exit 1
@@ @@ -901,104 +901,104 @@ check_params() { @@
 		elif [ -d "$ROOT_DIR/.hg" ] && [ -n "`hg help 2>/dev/null`" ]; then
 			revision=""
 			log 1 "checking revision... hg detection"
 		else
 			revision=""
 			log 1 "checking revision... no detection"
 			log 1 "WARNING: there is no means to determine the version."
 			log 1 "WARNING: please use a subversion, mercurial, or git checkout of OpenTTD."
 			log 1 "WARNING: you can only join game servers that have been compiled without"
 			log 1 "WARNING:   version detection."
 			log 1 "WARNING: there is a great chance you desync."
 			log 1 "WARNING: USE WITH CAUTION!"
 			sleep 5
 		fi
 	fi
 	if [ "$doc_dir" = "1" ]; then
 		if [ "$os" = "UNIX" ] || [ "$os" = "FREEBSD" ] || [ "$os" = "OPENBSD" ] || [ "$os" = "NETBSD" ] || [ "$os" = "HPUX" ] || [ "$os" = "SUNOS" ]; then
 			doc_dir="share/doc/openttd"
 		else
 			doc_dir="$data_dir/docs"
 		fi
 	else
-		doc_dir="`echo $doc_dir | sed 's~\([^\]\)\\\\ ~\1\\\\\\\\ ~g;s~\([^\]\) ~\1\\\\\\\\ ~g'`"
+		doc_dir="`echo $doc_dir | sed 's@\([^\]\)\\\\ @\1\\\\\\\\ @g;s@\([^\]\) @\1\\\\\\\\ @g'`"
 	fi
 	if [ "$icon_theme_dir" = "1" ]; then
 		if [ "$os" = "UNIX" ] || [ "$os" = "FREEBSD" ] || [ "$os" = "OPENBSD" ] || [ "$os" = "NETBSD" ] || [ "$os" = "HPUX" ] || [ "$os" = "SUNOS" ]; then
 			icon_theme_dir="share/icons/hicolor"
 		else
 			icon_theme_dir=""
 		fi
 	else
-		icon_theme_dir="`echo $icon_theme_dir | sed 's~\([^\]\)\\\\ ~\1\\\\\\\\ ~g;s~\([^\]\) ~\1\\\\\\\\ ~g'`"
+		icon_theme_dir="`echo $icon_theme_dir | sed 's@\([^\]\)\\\\ @\1\\\\\\\\ @g;s@\([^\]\) @\1\\\\\\\\ @g'`"
 	fi
 	if [ "$personal_dir" = "1" ]; then
 		if [ "$os" = "MINGW" ] || [ "$os" = "CYGWIN" ] || [ "$os" = "WINCE" ] || [ "$os" = "DOS" ]; then
 			personal_dir="OpenTTD"
 		elif [ "$os" = "OSX" ]; then
 			personal_dir="Documents/OpenTTD"
 		else
 			personal_dir=".openttd"
 		fi
 	else
-		personal_dir="`echo $personal_dir | sed 's~\([^\]\)\\\\ ~\1\\\\\\\\ ~g;s~\([^\]\) ~\1\\\\\\\\ ~g'`"
+		personal_dir="`echo $personal_dir | sed 's@\([^\]\)\\\\ @\1\\\\\\\\ @g;s@\([^\]\) @\1\\\\\\\\ @g'`"
 	fi
 	if [ "$shared_dir" = "1" ]; then
 		# we are using default values
 		if [ "$os" = "OSX" ]; then
 			shared_dir="/Library/Application\\\\ Support/OpenTTD"
 		else
 			shared_dir=""
 		fi
 	else
-		shared_dir="`echo $shared_dir | sed 's~\([^\]\)\\\\ ~\1\\\\\\\\ ~g;s~\([^\]\) ~\1\\\\\\\\ ~g'`"
+		shared_dir="`echo $shared_dir | sed 's@\([^\]\)\\\\ @\1\\\\\\\\ @g;s@\([^\]\) @\1\\\\\\\\ @g'`"
 	fi
 	if [ "$man_dir" = "1" ]; then
 		# add manpage on UNIX systems
 		if [ "$os" = "UNIX" ] || [ "$os" = "FREEBSD" ] || [ "$os" = "OPENBSD" ] || [ "$os" = "NETBSD" ] || [ "$os" = "HPUX" ] || [ "$os" = "SUNOS" ] || [ "$os" = "OSX" ]; then
 			man_dir="share/man/man6"
 		else
 			man_dir=""
 		fi
 	else
-		man_dir="`echo $man_dir | sed 's~\([^\]\)\\\\ ~\1\\\\\\\\ ~g;s~\([^\]\) ~\1\\\\\\\\ ~g'`"
+		man_dir="`echo $man_dir | sed 's@\([^\]\)\\\\ @\1\\\\\\\\ @g;s@\([^\]\) @\1\\\\\\\\ @g'`"
 	fi
 	if [ "$menu_dir" = "1" ]; then
 		# add a freedesktop menu item only for some UNIX systems
 		if [ "$os" = "UNIX" ] || [ "$os" = "FREEBSD" ] || [ "$os" = "OPENBSD" ] || [ "$os" = "NETBSD" ] || [ "$os" = "HPUX" ] || [ "$os" = "SUNOS" ]; then
 			menu_dir="share/applications"
 		else
 			menu_dir=""
 		fi
 	else
-		menu_dir="`echo $menu_dir | sed 's~\([^\]\)\\\\ ~\1\\\\\\\\ ~g;s~\([^\]\) ~\1\\\\\\\\ ~g'`"
+		menu_dir="`echo $menu_dir | sed 's@\([^\]\)\\\\ @\1\\\\\\\\ @g;s@\([^\]\) @\1\\\\\\\\ @g'`"
 	fi
 	# "set_universal_binary_flags" needs to be before "detect_iconv"
 	set_universal_binary_flags
 	detect_iconv
 	if [ -n "$personal_dir" ]
 	then
 		log 1 "personal home directory... $personal_dir"
 	else
 		log 1 "personal home directory... none"
 	fi
 	if [ -n "$shared_dir" ]
 	then
 		log 1 "shared data directory... $shared_dir"
 	else
 		log 1 "shared data directory... none"
 	fi
 	if [ -n "$install_dir" ]
 	then
 		log 1 "installation directory... $install_dir"
 	else
@@ @@ -1216,49 +1216,49 @@ make_cflags_and_ldflags() { @@
 	# Most targets act like UNIX, just with some additions
 	if [ "$os" = "BEOS" ] || [ "$os" = "OSX" ] || [ "$os" = "MORPHOS" ] || [ "$os" = "FREEBSD" ] || [ "$os" = "OPENBSD" ] || [ "$os" = "NETBSD" ] || [ "$os" = "HPUX" ] || [ "$os" = "SUNOS" ] || [ "$os" = "OS2" ]; then
 		CFLAGS="$CFLAGS -DUNIX"
 	fi
 	# And others like Windows
 	if [ "$os" = "MINGW" ] || [ "$os" = "CYGWIN" ] || [ "$os" = "WINCE" ]; then
 		CFLAGS="$CFLAGS -DWIN"
 	fi
 	if [ -n "$allegro_config" ]; then
 		CFLAGS="$CFLAGS -DWITH_ALLEGRO"
 		CFLAGS="$CFLAGS `$allegro_config --cflags`"
 		if [ "$os" != "MINGW" ] && [ "$os" != "CYGWIN" ] && [ "$os" != "WINCE" ]; then
 			if [ "$enable_static" != "0" ]; then
 				LIBS="$LIBS `$allegro_config --static --libs`"
 			else
 				LIBS="$LIBS `$allegro_config --libs`"
 			fi
 		fi
 	fi
 	if [ -n "$sdl_config" ]; then
 		CFLAGS="$CFLAGS -DWITH_SDL"
 		# SDL must not add _GNU_SOURCE as it breaks many platforms
-		CFLAGS="$CFLAGS `$sdl_config --cflags | sed 's~-D_GNU_SOURCE[^ ]*~~'`"
+		CFLAGS="$CFLAGS `$sdl_config --cflags | sed 's@-D_GNU_SOURCE[^ ]*@@'`"
 		if [ "$os" != "MINGW" ] && [ "$os" != "CYGWIN" ] && [ "$os" != "WINCE" ]; then
 			if [ "$enable_static" != "0" ]; then
 				LIBS="$LIBS `$sdl_config --static-libs`"
 			else
 				LIBS="$LIBS `$sdl_config --libs`"
 			fi
 		fi
 	fi
 	if [ "$with_cocoa" != "0" ]; then
 		CFLAGS="$CFLAGS -DWITH_COCOA"
 		LIBS="$LIBS -F/System/Library/Frameworks -framework Cocoa -framework Carbon -framework AudioUnit"
 		if [ "$enable_cocoa_quartz" != "0" ]; then
 			CFLAGS="$CFLAGS -DENABLE_COCOA_QUARTZ"
 		fi
 		if [ "$enable_cocoa_quickdraw" != "0" ]; then
 			CFLAGS="$CFLAGS -DENABLE_COCOA_QUICKDRAW"
 		fi
 	fi
 	if [ "$with_zlib" != "0" ]; then
 		if [ "$enable_static" != "0" ] && [ "$os" != "OSX" ]; then
@@ @@ -1278,49 +1278,49 @@ make_cflags_and_ldflags() { @@
 	if [ -n "$png_config" ]; then
 		CFLAGS="$CFLAGS -DWITH_PNG"
 		CFLAGS="$CFLAGS `$png_config --cppflags --I_opts | tr '\n\r' '  '`"
 		# The extra flags are unneeded for latest libpng-config, but some versions are so broken...
 		if [ "$enable_static" != "0" ]; then
 			if [ "$os" = "OSX" ]; then
 				LIBS="$LIBS `$png_config --prefix`/lib/libpng.a"
 			else
 				LIBS="$LIBS `$png_config --static --ldflags | tr '\n\r' '  '`"
 			fi
 		else
 			LIBS="$LIBS `$png_config --ldflags | tr '\n\r' '  '`"
 		fi
 	fi
 	if [ -n "$fontconfig_config" ]; then
 		CFLAGS="$CFLAGS -DWITH_FONTCONFIG"
 		CFLAGS="$CFLAGS `$fontconfig_config --cflags | tr '\n\r' '  '`"
 		if [ "$enable_static" != "0" ]; then
 			if [ "$os" = "OSX" ]; then
 				# fontconfig_config goes via pkg-config on all systems, which doesn't know --prefix
 				# Also, despite the reason we link to the .a file ourself (because we can't use -static), we do need to ask pkg-config about possible other deps
-				LIBS="$LIBS `$fontconfig_config --variable=prefix`/lib/libfontconfig.a `$fontconfig_config --libs --static | sed s~-lfontconfig~~`"
+				LIBS="$LIBS `$fontconfig_config --variable=prefix`/lib/libfontconfig.a `$fontconfig_config --libs --static | sed s@-lfontconfig@@`"
 			else
 				LIBS="$LIBS `$fontconfig_config --libs --static | tr '\n\r' '  '`"
 			fi
 		else
 			LIBS="$LIBS `$fontconfig_config --libs | tr '\n\r' '  '`"
 		fi
 	fi
 	if [ -n "$freetype_config" ]; then
 		CFLAGS="$CFLAGS -DWITH_FREETYPE"
 		CFLAGS="$CFLAGS `$freetype_config --cflags | tr '\n\r' '  '`"
 		if [ "$enable_static" != "0" ]; then
 			if [ "$os" = "OSX" ]; then
 				LIBS="$LIBS `$freetype_config --prefix`/lib/libfreetype.a"
 			else
 				# Is it possible to do static with freetype, if so: how?
 				LIBS="$LIBS `$freetype_config --libs | tr '\n\r' '  '`"
 			fi
 		else
 			LIBS="$LIBS `$freetype_config --libs | tr '\n\r' '  '`"
 		fi
 	fi
@@ @@ -1412,50 +1412,50 @@ make_cflags_and_ldflags() { @@
 		CFLAGS="$CFLAGS -mcpu=G5 -mpowerpc64 -mtune=970 -mcpu=970 -mpowerpc-gpopt"
 	fi
 	if [ -n "$personal_dir" ]; then
 		CFLAGS="$CFLAGS -DWITH_PERSONAL_DIR -DPERSONAL_DIR=\\\\\"$personal_dir\\\\\""
 	fi
 	if [ -n "$shared_dir" ]; then
 		CFLAGS="$CFLAGS -DWITH_SHARED_DIR -DSHARED_DIR=\\\\\"$shared_dir\\\\\""
 	fi
 	CFLAGS="$CFLAGS -DGLOBAL_DATA_DIR=\\\\\"$prefix_dir/$data_dir\\\\\""
 	log 1 "using CFLAGS... $CFLAGS $CC_CFLAGS"
 	log 1 "using LDFLAGS... $LIBS $LDFLAGS"
 	# Makedepend doesn't like something like: -isysroot /OSX/blabla
 	#  so convert it to: -isysroot -OSX/blabla. makedepend just ignores
 	#  any - command it doesn't know, so we are pretty save.
 	# Lovely hackish, not?
 	# Btw, this almost always comes from outside the configure, so it is
 	#  not something we can control.
 	# Also make makedepend aware of compiler's built-in defines.
 	if [ "$with_makedepend" != "0" ] || [ "$enable_builtin_depend" != "0" ]; then
 		cflags_makedep="`echo | $cxx_host -E -x c++ -dM - | sed 's~.define ~-D~g;s~ .*~ ~g;s~(.*)~~g' | tr -d '\r\n'`"
 		cflags_makedep="$cflags_makedep `echo "$CFLAGS" | sed 's~ /~ -~g;s~-I[ ]*[^ ]*~~g'`"
 		cflags_makedep="`echo | $cxx_host -E -x c++ -dM - | sed 's@.define @-D@g;s@ .*@ @g;s@(.*)@@g' | tr -d '\r\n'`"
 		cflags_makedep="$cflags_makedep `echo "$CFLAGS" | sed 's@ /@ -@g;s@-I[ ]*[^ ]*@@g'`"
 	else
 		makedepend=""
 	fi
 	if [ "$with_distcc" != "0" ]; then
 		cc_host="$distcc $cc_host"
 		cxx_host="$distcc $cxx_host"
 		log 1 ""
 		log 1 " NOTICE: remind yourself to use 'make -jN' to make use of distcc"
 		log 1 ""
 	fi
 	if [ "$with_ccache" != "0" ]; then
 		cc_host="$ccache $cc_host"
 		cxx_host="$ccache $cxx_host"
 	fi
+}
 check_compiler() {
 	# Params:
 	# $1 - Type for message (build / host)
 	# $2 - What to fill with the found compiler
 	# $3 - System to try
 	# $4 - Compiler to try
@@ @@ -2583,147 +2583,147 @@ detect_cputype() { @@
+}
 make_sed() {
 	T_CFLAGS="$CFLAGS"
 	T_LDFLAGS="$LDFLAGS"
 	# We check here if we are PPC, because then we need to enable FOUR_BYTE_BOOL
 	#  We do this here, and not sooner, so universal builds also have this
 	#  automatically correct
 	# FOUR_BYTE_BOOL is needed, because C++ uses 4byte for a bool on PPC, where
 	#  we use 1 byte per bool normally in C part. So convert that last one to 4
 	#  bytes too, but only for PPC.
 	ppc=`$cc_host -dumpmachine | egrep "powerpc|ppc"`
 	if [ -n "$ppc" ]; then
 		T_CFLAGS="$T_CFLAGS -DFOUR_BYTE_BOOL"
 	fi
 	SRC_OBJS_DIR="$BASE_SRC_OBJS_DIR/$OBJS_SUBDIR"
 	# All the data needed to compile a single target
 	#  Make sure if you compile multiple targets to
 	#  use multiple OBJS_DIR, because all in-between
 	#  binaries are stored in there, and nowhere else.
 	SRC_REPLACE="
 		s~!!CC_HOST!!~$cc_host~g;
 		s~!!CXX_HOST!!~$cxx_host~g;
 		s~!!CC_BUILD!!~$cc_build~g;
 		s~!!CXX_BUILD!!~$cxx_build~g;
 		s~!!WINDRES!!~$windres~g;
 		s~!!STRIP!!~$strip $strip_arg~g;
 		s~!!LIPO!!~$lipo~g;
 		s~!!CC_CFLAGS!!~$CC_CFLAGS~g;
 		s~!!CFLAGS!!~$T_CFLAGS~g;
 		s~!!CFLAGS_BUILD!!~$CFLAGS_BUILD~g;
 		s~!!STRGEN_FLAGS!!~$strgen_flags~g;
 		s~!!LIBS!!~$LIBS~g;
 		s~!!LDFLAGS!!~$T_LDFLAGS~g;
 		s~!!BIN_DIR!!~$BIN_DIR~g;
 		s~!!ROOT_DIR!!~$ROOT_DIR~g;
 		s~!!MEDIA_DIR!!~$MEDIA_DIR~g;
 		s~!!SOURCE_LIST!!~$SOURCE_LIST~g;
 		s~!!SRC_OBJS_DIR!!~$SRC_OBJS_DIR~g;
 		s~!!LANG_OBJS_DIR!!~$LANG_OBJS_DIR~g;
 		s~!!SRC_DIR!!~$SRC_DIR~g;
 		s~!!SCRIPT_SRC_DIR!!~$SCRIPT_SRC_DIR~g;
 		s~!!OSXAPP!!~$OSXAPP~g;
 		s~!!LANG_DIR!!~$LANG_DIR~g;
 		s~!!TTD!!~$TTD~g;
 		s~!!BINARY_DIR!!~$prefix_dir/$binary_dir~g;
 		s~!!DATA_DIR!!~$prefix_dir/$data_dir~g;
 		s~!!DOC_DIR!!~$prefix_dir/$doc_dir~g;
 		s~!!MAN_DIR!!~$prefix_dir/$man_dir~g;
 		s~!!ICON_DIR!!~$prefix_dir/$icon_dir~g;
 		s~!!ICON_THEME_DIR!!~$prefix_dir/$icon_theme_dir~g;
 		s~!!PERSONAL_DIR!!~$personal_dir~g;
 		s~!!SHARED_DIR!!~$shared_dir~g;
 		s~!!INSTALL_DIR!!~$install_dir~g;
 		s~!!BINARY_NAME!!~$binary_name~g;
 		s~!!STRGEN!!~$STRGEN~g;
 		s~!!ENDIAN_CHECK!!~$ENDIAN_CHECK~g;
 		s~!!DEPEND!!~$DEPEND~g;
 		s~!!ENDIAN_FORCE!!~$endian~g;
 		s~!!STAGE!!~$STAGE~g;
 		s~!!MAKEDEPEND!!~$makedepend~g;
 		s~!!CFLAGS_MAKEDEP!!~$cflags_makedep~g;
 		s~!!SORT!!~$sort~g;
 		s~!!CONFIG_CACHE_COMPILER!!~config.cache.compiler~g;
 		s~!!CONFIG_CACHE_LINKER!!~config.cache.linker~g;
 		s~!!CONFIG_CACHE_ENDIAN!!~config.cache.endian~g;
 		s~!!CONFIG_CACHE_SOURCE!!~config.cache.source~g;
 		s~!!CONFIG_CACHE_VERSION!!~config.cache.version~g;
 		s~!!CONFIG_CACHE_SOURCE_LIST!!~config.cache.source.list~g;
 		s~!!CONFIG_CACHE_PWD!!~config.cache.pwd~g;
 		s~!!LANG_SUPPRESS!!~$lang_suppress~g;
 		s~!!OBJS_C!!~$OBJS_C~g;
 		s~!!OBJS_CPP!!~$OBJS_CPP~g;
 		s~!!OBJS_MM!!~$OBJS_MM~g;
 		s~!!OBJS_RC!!~$OBJS_RC~g;
 		s~!!SRCS!!~$SRCS~g;
 		s~!!OS!!~$os~g;
 		s~!!CONFIGURE_FILES!!~$CONFIGURE_FILES~g;
 		s~!!REVISION!!~$revision~g;
 		s~!!AWK!!~$awk~g;
 		s~!!GCC295!!~$gcc295~g;
 		s~!!DISTCC!!~$distcc~g;
 		s@!!CC_HOST!!@$cc_host@g;
 		s@!!CXX_HOST!!@$cxx_host@g;
 		s@!!CC_BUILD!!@$cc_build@g;
 		s@!!CXX_BUILD!!@$cxx_build@g;
 		s@!!WINDRES!!@$windres@g;
 		s@!!STRIP!!@$strip $strip_arg@g;
 		s@!!LIPO!!@$lipo@g;
 		s@!!CC_CFLAGS!!@$CC_CFLAGS@g;
 		s@!!CFLAGS!!@$T_CFLAGS@g;
 		s@!!CFLAGS_BUILD!!@$CFLAGS_BUILD@g;
 		s@!!STRGEN_FLAGS!!@$strgen_flags@g;
 		s@!!LIBS!!@$LIBS@g;
 		s@!!LDFLAGS!!@$T_LDFLAGS@g;
 		s@!!BIN_DIR!!@$BIN_DIR@g;
 		s@!!ROOT_DIR!!@$ROOT_DIR@g;
 		s@!!MEDIA_DIR!!@$MEDIA_DIR@g;
 		s@!!SOURCE_LIST!!@$SOURCE_LIST@g;
 		s@!!SRC_OBJS_DIR!!@$SRC_OBJS_DIR@g;
 		s@!!LANG_OBJS_DIR!!@$LANG_OBJS_DIR@g;
 		s@!!SRC_DIR!!@$SRC_DIR@g;
 		s@!!SCRIPT_SRC_DIR!!@$SCRIPT_SRC_DIR@g;
 		s@!!OSXAPP!!@$OSXAPP@g;
 		s@!!LANG_DIR!!@$LANG_DIR@g;
 		s@!!TTD!!@$TTD@g;
 		s@!!BINARY_DIR!!@$prefix_dir/$binary_dir@g;
 		s@!!DATA_DIR!!@$prefix_dir/$data_dir@g;
 		s@!!DOC_DIR!!@$prefix_dir/$doc_dir@g;
 		s@!!MAN_DIR!!@$prefix_dir/$man_dir@g;
 		s@!!ICON_DIR!!@$prefix_dir/$icon_dir@g;
 		s@!!ICON_THEME_DIR!!@$prefix_dir/$icon_theme_dir@g;
 		s@!!PERSONAL_DIR!!@$personal_dir@g;
 		s@!!SHARED_DIR!!@$shared_dir@g;
 		s@!!INSTALL_DIR!!@$install_dir@g;
 		s@!!BINARY_NAME!!@$binary_name@g;
 		s@!!STRGEN!!@$STRGEN@g;
 		s@!!ENDIAN_CHECK!!@$ENDIAN_CHECK@g;
 		s@!!DEPEND!!@$DEPEND@g;
 		s@!!ENDIAN_FORCE!!@$endian@g;
 		s@!!STAGE!!@$STAGE@g;
 		s@!!MAKEDEPEND!!@$makedepend@g;
 		s@!!CFLAGS_MAKEDEP!!@$cflags_makedep@g;
 		s@!!SORT!!@$sort@g;
 		s@!!CONFIG_CACHE_COMPILER!!@config.cache.compiler@g;
 		s@!!CONFIG_CACHE_LINKER!!@config.cache.linker@g;
 		s@!!CONFIG_CACHE_ENDIAN!!@config.cache.endian@g;
 		s@!!CONFIG_CACHE_SOURCE!!@config.cache.source@g;
 		s@!!CONFIG_CACHE_VERSION!!@config.cache.version@g;
 		s@!!CONFIG_CACHE_SOURCE_LIST!!@config.cache.source.list@g;
 		s@!!CONFIG_CACHE_PWD!!@config.cache.pwd@g;
 		s@!!LANG_SUPPRESS!!@$lang_suppress@g;
 		s@!!OBJS_C!!@$OBJS_C@g;
 		s@!!OBJS_CPP!!@$OBJS_CPP@g;
 		s@!!OBJS_MM!!@$OBJS_MM@g;
 		s@!!OBJS_RC!!@$OBJS_RC@g;
 		s@!!SRCS!!@$SRCS@g;
 		s@!!OS!!@$os@g;
 		s@!!CONFIGURE_FILES!!@$CONFIGURE_FILES@g;
 		s@!!REVISION!!@$revision@g;
 		s@!!AWK!!@$awk@g;
 		s@!!GCC295!!@$gcc295@g;
 		s@!!DISTCC!!@$distcc@g;
+	"
 	if [ "$icon_theme_dir" != "" ]; then
 		SRC_REPLACE="$SRC_REPLACE
-			s~!!ICON_THEME_DIR!!~$prefix_dir/$icon_theme_dir~g;
+			s@!!ICON_THEME_DIR!!@$prefix_dir/$icon_theme_dir@g;
+		"
 	else
 		SRC_REPLACE="$SRC_REPLACE
-			s~!!ICON_THEME_DIR!!~~g;
+			s@!!ICON_THEME_DIR!!@@g;
+		"
 	fi
 	if [ "$man_dir" != "" ]; then
 		SRC_REPLACE="$SRC_REPLACE
-			s~!!MAN_DIR!!~$prefix_dir/$man_dir~g;
+			s@!!MAN_DIR!!@$prefix_dir/$man_dir@g;
+		"
 	else
 		SRC_REPLACE="$SRC_REPLACE
-			s~!!MAN_DIR!!~~g;
+			s@!!MAN_DIR!!@@g;
+		"
 	fi
 	if [ "$menu_dir" != "" ]; then
 		SRC_REPLACE="$SRC_REPLACE
-			s~!!MENU_DIR!!~$prefix_dir/$menu_dir~g;
+			s@!!MENU_DIR!!@$prefix_dir/$menu_dir@g;
+		"
 	else
 		SRC_REPLACE="$SRC_REPLACE
-			s~!!MENU_DIR!!~~g;
+			s@!!MENU_DIR!!@@g;
+		"
 	fi
+}
 generate_menu_item() {
 	MENU_REPLACE="
 		s~!!TTD!!~$TTD~g;
 		s~!!MENU_GROUP!!~$menu_group~g;
 		s~!!MENU_NAME!!~$menu_name~g
 		s@!!TTD!!@$TTD@g;
 		s@!!MENU_GROUP!!@$menu_group@g;
 		s@!!MENU_NAME!!@$menu_name@g
+	"
 	log 1 "Generating menu item..."
 	mkdir -p media
 	< $ROOT_DIR/media/openttd.desktop.in sed "$MENU_REPLACE" > media/openttd.desktop
+}
 generate_main() {
 	STAGE="[MAIN]"
 	make_sed
 	# Create the main Makefile
 	log 1 "Generating Makefile..."
 	echo "# Auto-generated file from 'Makefile.in' -- DO NOT EDIT" > Makefile
 	< $ROOT_DIR/Makefile.in sed "$SRC_REPLACE" >> Makefile
 	cp $ROOT_DIR/Makefile.bundle.in Makefile.bundle
 	echo "# Auto-generated file -- DO NOT EDIT" > Makefile.am
 	echo >> Makefile.am
 	# Make the copy of the source-list, so we don't trigger an unwanted recompile
 	cp $SOURCE_LIST config.cache.source.list
 	# Add the current directory, so we don't trigger an unwanted recompile
 	echo "`pwd`" > config.cache.pwd
 	# Make sure config.cache is OLDER then config.cache.source.list
 	touch config.cache

configure

➞

Show inline comments

@@ @@ -26,72 +26,72 @@ ROOT_DIR="`cd $ROOT_DIR && pwd`" @@
 check_path_characters
 PWD="`pwd`"
 PREFIX="$PWD/bin"
 . $ROOT_DIR/config.lib
 # Set default dirs
 OBJS_DIR="$PWD/objs"
 BASE_SRC_OBJS_DIR="$OBJS_DIR"
 LANG_OBJS_DIR="$OBJS_DIR/lang"
 BIN_DIR="$PREFIX"
 SRC_DIR="$ROOT_DIR/src"
 LANG_DIR="$SRC_DIR/lang"
 MEDIA_DIR="$ROOT_DIR/media"
 SOURCE_LIST="$ROOT_DIR/source.list"
 if [ "$1" = "--reconfig" ] || [ "$1" = "--reconfigure" ]; then
 	if [ ! -f "config.cache" ]; then
 		echo "can't reconfigure, because never configured before"
 		exit 1
 	fi
 	# Make sure we don't lock config.cache
-	cat config.cache | sed 's~\\ ~\\\\ ~g' > cache.tmp
+	cat config.cache | sed 's@\\ @\\\\ @g' > cache.tmp
 	sh cache.tmp
 	rm -f cache.tmp
 	exit $?
 fi
 set_default
 detect_params "$@"
 check_params
 save_params
 make_cflags_and_ldflags
 EXE=""
 if [ "$os" = "MINGW" ] || [ "$os" = "CYGWIN" ] || [ "$os" = "OS2" ] || [ "$os" = "DOS" ] || [ "$os" = "WINCE" ]; then
 	EXE=".exe"
 fi
 TTD="openttd$EXE"
 STRGEN="strgen$EXE"
 ENDIAN_CHECK="endian_check$EXE"
 DEPEND="depend$EXE"
 if [ -z "$sort" ]; then
-	PIPE_SORT="sed s~a~a~"
+	PIPE_SORT="sed s@a@a@"
 else
 	PIPE_SORT="$sort"
 fi
 if [ ! -f "$LANG_DIR/english.txt" ]; then
 	echo "Languages not found in $LANG_DIR. Can't continue without it."
 	echo "Please make sure the dir exists and contains at least english.txt"
 fi
 # Read the source.list and process it
 SRCS="`< $ROOT_DIR/source.list tr '\r' '\n' | $awk '
 	{  }
 	/^(	*)#end/  { if (deep == skip) { skip -= 1; } deep -= 1; next; }
 	/^(	*)#else/ { if (deep == skip) { skip -= 1; } else if (deep - 1 == skip) { skip += 1; } next; }
 	/^(	*)#if/   {
 		gsub("	", "", $0);
 		gsub("^#if ", "", $0);
 		if (deep != skip) { deep += 1; next; }
 		deep += 1;
 		if ($0 == "ALLEGRO"     && "'$allegro_config'" == "")      { next; }
 		if ($0 == "SDL"         && "'$sdl_config'" == "")          { next; }
@@ @@ -115,36 +115,36 @@ SRCS="`< $ROOT_DIR/source.list tr '\r' ' @@
 		skip += 1;
 		next;
+	}
 	/^(	*)#/ { next }
 	/^$/ { next }
 	/\.h$/ { next }
 	/\.hpp$/ { next }
+	{
 		if (deep == skip) {
 			gsub("	", "", $0);
 			print $0;
+		}
+	}
 ' | $PIPE_SORT`"
 OBJS_C="`  echo \"$SRCS\" | $awk ' { ORS = " " } /\.c$/   { gsub(".c$",   ".o", $0); print $0; }'`"
 OBJS_CPP="`echo \"$SRCS\" | $awk ' { ORS = " " } /\.cpp$/ { gsub(".cpp$", ".o", $0); print $0; }'`"
 OBJS_MM="` echo \"$SRCS\" | $awk ' { ORS = " " } /\.mm$/  { gsub(".mm$",  ".o", $0); print $0; }'`"
 OBJS_RC="` echo \"$SRCS\" | $awk ' { ORS = " " } /\.rc$/  { gsub(".rc$",  ".o", $0); print $0; }'`"
 SRCS="`    echo \"$SRCS\" | $awk ' { ORS = " " } { print $0; }'`"
 # In makefiles, we always use -u for sort
 if [ -z "$sort" ]; then
-	sort="sed s~a~a~"
+	sort="sed s@a@a@"
 else
 	sort="$sort -u"
 fi
 CONFIGURE_FILES="$ROOT_DIR/configure $ROOT_DIR/config.lib $ROOT_DIR/Makefile.in $ROOT_DIR/Makefile.lang.in $ROOT_DIR/Makefile.src.in $ROOT_DIR/Makefile.bundle.in"
 generate_main
 generate_lang
 generate_src
 check_path_characters

findversion.sh

➞

Show inline comments

@@ @@ -65,54 +65,54 @@ SRC_DIR=src @@
 # Determine if we are using a modified version
 # Assume the dir is not modified
 MODIFIED="0"
 if [ -d "$ROOT_DIR/.svn" ]; then
 	# We are an svn checkout
 	if [ -n "`svnversion \"$SRC_DIR\" | grep 'M'`" ]; then
 		MODIFIED="2"
 	fi
 	# Find the revision like: rXXXXM-branch
 	BRANCH=`LC_ALL=C svn info "$SRC_DIR" | "$AWK" '/^URL:.*branches/ { split($2, a, "/"); for(i in a) if (a[i]=="branches") { print a[i+1]; break } }'`
 	TAG=`LC_ALL=C svn info "$SRC_DIR" | "$AWK" '/^URL:.*tags/ { split($2, a, "/"); for(i in a) if (a[i]=="tags") { print a[i+1]; break } }'`
 	REV_NR=`LC_ALL=C svn info "$SRC_DIR" | "$AWK" '/^Last Changed Rev:/ { print $4 }'`
 	if [ -n "$TAG" ]; then
 		REV=$TAG
 	else
 		REV="r$REV_NR"
 	fi
 elif [ -d "$ROOT_DIR/.git" ]; then
 	# We are a git checkout
 	if [ -n "`git diff-index HEAD \"$SRC_DIR\"`" ]; then
 		MODIFIED="2"
 	fi
 	HASH=`LC_ALL=C git rev-parse --verify HEAD 2>/dev/null`
 	REV="g`echo $HASH | cut -c1-8`"
 	BRANCH=`git branch|grep '[*]' | sed 's~\* ~~;s~^master$~~'`
 	REV_NR=`LC_ALL=C git log --pretty=format:%s "$SRC_DIR" | grep "^(svn r[0-9]*)" | head -n 1 | sed "s~.*(svn r\([0-9]*\)).*~\1~"`
 	BRANCH=`git branch|grep '[*]' | sed 's@\* @@;s@^master$@@'`
 	REV_NR=`LC_ALL=C git log --pretty=format:%s "$SRC_DIR" | grep "^(svn r[0-9]*)" | head -n 1 | sed "s@.*(svn r\([0-9]*\)).*@\1@"`
 elif [ -d "$ROOT_DIR/.hg" ]; then
 	# We are a hg checkout
 	if [ -n "`hg status \"$SRC_DIR\" | grep -v '^?'`" ]; then
 		MODIFIED="2"
 	fi
 	HASH=`LC_ALL=C hg parents 2>/dev/null | head -n 1 | cut -d: -f3`
 	REV="h`echo $HASH | cut -c1-8`"
 	BRANCH=`hg branch | sed 's~^default$~~'`
 	REV_NR=`LC_ALL=C hg log -r $HASH:0 -k "svn" -l 1 --template "{desc}\n" "$SRC_DIR" | grep "^(svn r[0-9]*)" | head -n 1 | sed "s~.*(svn r\([0-9]*\)).*~\1~"`
 	BRANCH=`hg branch | sed 's@^default$@@'`
 	REV_NR=`LC_ALL=C hg log -r $HASH:0 -k "svn" -l 1 --template "{desc}\n" "$SRC_DIR" | grep "^(svn r[0-9]*)" | head -n 1 | sed "s@.*(svn r\([0-9]*\)).*@\1@"`
 else
 	# We don't know
 	MODIFIED="1"
 	BRANCH=""
 	REV=""
 	REV_NR=""
 fi
 if [ "$MODIFIED" -eq "2" ]; then
 	REV="${REV}M"
 fi
 CLEAN_REV=${REV}
 if [ -n "$BRANCH" ]; then
 	REV="${REV}-$BRANCH"
 fi
 echo "$REV	$REV_NR	$MODIFIED	$CLEAN_REV"

projects/determineversion.vbs

➞

Show inline comments

 Option Explicit
 Dim FSO
 Set FSO = CreateObject("Scripting.FileSystemObject")
 Sub FindReplaceInFile(filename, to_find, replacement)
 	Dim file, data
 	Set file = FSO.OpenTextFile(filename, 1, 0, 0)
 	data = file.ReadAll
 	file.Close
 	data = Replace(data, to_find, replacement)
 	Set file = FSO.CreateTextFile(filename, -1, 0)
 	file.Write data
 	file.Close
 End Sub
 Sub UpdateFile(modified, revision, version, cur_date, filename)
 	FSO.CopyFile filename & ".in", filename
 	FindReplaceInFile filename, "@@MODIFIED@@", modified
 	FindReplaceInFile filename, "@@REVISION@@", revision
 	FindReplaceInFile filename, "@@VERSION@@", version
 	FindReplaceInFile filename, "@@DATE@@", cur_date
 	FindReplaceInFile filename, "!!MODIFIED!!", modified
 	FindReplaceInFile filename, "!!REVISION!!", revision
 	FindReplaceInFile filename, "!!VERSION!!", version
 	FindReplaceInFile filename, "!!DATE!!", cur_date
 End Sub
 Sub UpdateFiles(version)
 	Dim modified, revision, cur_date
 	cur_date = DatePart("D", Date) & "." & DatePart("M", Date) & "." & DatePart("YYYY", Date)
 	If InStr(version, Chr(9)) Then
 		revision = Mid(version, InStr(version, Chr(9)) + 1)
 		revision = Mid(revision, 1, InStr(revision, Chr(9)) - 1)
 		modified = Mid(version, InStrRev(version, Chr(9)) + 1)
 		version  = Mid(version, 1, InStr(version, Chr(9)) - 1)
 	Else
 		revision = 0
 		modified = 1
 	End If
 	UpdateFile modified, revision, version, cur_date, "../src/rev.cpp"
 	UpdateFile modified, revision, version, cur_date, "../src/ottdres.rc"
 End Sub
 Function ReadRegistryKey(shive, subkey, valuename, architecture)
 	Dim hiveKey, objCtx, objLocator, objServices, objReg, Inparams, Outparams
 	' First, get the Registry Provider for the requested architecture

src/ottdres.rc.in

➞

Show inline comments

@@ @@ -43,64 +43,64 @@ 100 ICON DISCARDA @@
 DIALOG DISCARDABLE  0, 0, 305, 77
 STYLE DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU
 CAPTION "Fatal Application Failure"
 FONT 8, "MS Sans Serif"
 BEGIN
     PUSHBUTTON      "&Close",12,7,58,50,14
 //    PUSHBUTTON      "&Submit report",14,81,58,68,14,WS_DISABLED
     PUSHBUTTON      "&Emergency save",13,155,58,68,14
     PUSHBUTTON      "",15,243,58,55,14
     EDITTEXT        11,7,79,291,118,ES_MULTILINE | ES_READONLY | WS_VSCROLL |
                     WS_HSCROLL | NOT WS_TABSTOP
     LTEXT           "",10,36,7,262,43
     ICON            100,IDC_STATIC,9,9,20,20
 END
 #ifndef _MAC
 /////////////////////////////////////////////////////////////////////////////
 //
 // Version
 //
 VS_VERSION_INFO VERSIONINFO
  FILEVERSION 0,8,0,@@REVISION@@
  PRODUCTVERSION 0,8,0,@@REVISION@@
  FILEVERSION 0,8,0,!!REVISION!!
  PRODUCTVERSION 0,8,0,!!REVISION!!
  FILEFLAGSMASK 0x3fL
 #ifdef _DEBUG
  FILEFLAGS 0x1L
 #else
  FILEFLAGS 0x0L
 #endif
  FILEOS 0x4L
  FILETYPE 0x1L
  FILESUBTYPE 0x0L
 BEGIN
     BLOCK "StringFileInfo"
     BEGIN
         BLOCK "000004b0"
         BEGIN
             VALUE "Comments", "This program is licensed under the GNU General Public License.\0"
             VALUE "CompanyName", "OpenTTD Development Team\0"
             VALUE "FileDescription", "OpenTTD\0"
-            VALUE "FileVersion", "Development @@VERSION@@\0"
+            VALUE "FileVersion", "Development !!VERSION!!\0"
             VALUE "InternalName", "openttd\0"
             VALUE "LegalCopyright", "Copyright \xA9 OpenTTD Developers 2002-2009. All Rights Reserved.\0"
             VALUE "LegalTrademarks", "\0"
             VALUE "OriginalFilename", "openttd.exe\0"
             VALUE "PrivateBuild", "\0"
             VALUE "ProductName", "OpenTTD\0"
-            VALUE "ProductVersion", "Development @@VERSION@@\0"
+            VALUE "ProductVersion", "Development !!VERSION!!\0"
             VALUE "SpecialBuild", "-\0"
         END
     END
     BLOCK "VarFileInfo"
     BEGIN
         VALUE "Translation", 0x0, 1200
     END
 END
 #endif    // !_MAC
 #endif    // Neutral (Default) resources
 /////////////////////////////////////////////////////////////////////////////

src/rev.cpp.in

➞

Show inline comments

 /* $Id$ */
 /** @file rev.cpp Autogenerated file with the revision and such of OpenTTD. */
 #include "stdafx.h"
 #include "rev.h"
 /**
  * The text version of OpenTTD's revision.
  * This will be either "<major>.<minor>.<build>[-RC<rc>]",
  * "r<revision number>[M][-<branch>]" or "norev000".
+ *
  * The major, minor and build are the numbers that describe releases of
  * OpenTTD (like 0.5.3). "-RC" is used to flag release candidates.
+ *
  * The revision number is fairly straight forward. The M is to show that
  * the binary is made from modified source code. The branch shows the
  * branch the revision is of and will not be there when it is trunk.
+ *
  * norev000 is for non-releases that are made on systems without
  * subversion or sources that are not a checkout of subversion.
  */
-const char _openttd_revision[] = "@@VERSION@@";
+const char _openttd_revision[] = "!!VERSION!!";
 /**
  * Let us know if current build was modified. This detection
  * works even in the case when revision string is overriden by
  * --revision argument.
  * Value 0 means no modification, 1 is for unknown state
  * (compiling from sources without any version control software)
  * and 2 is for modified revision.
  */
-const byte _openttd_revision_modified = @@MODIFIED@@;
+const byte _openttd_revision_modified = !!MODIFIED!!;
 /**
  * The NewGRF revision of OTTD:
  * bits  meaning.
  * 28-31 major version
  * 24-27 minor version
  * 20-23 build
  *    19 1 if it is a release, 0 if it is not.
  *  0-18 revision number; 0 for releases and when the revision is unknown.
+ *
  * The 19th bit is there so the development/betas/alpha, etc. leading to a
  * final release will always have a lower version number than the released
  * version, thus making comparisions on specific revisions easy.
  */
-const uint32 _openttd_newgrf_version = 0 << 28 | 8 << 24 | 0 << 20 | 0 << 19 | (@@REVISION@@ & ((1 << 19) - 1));
+const uint32 _openttd_newgrf_version = 0 << 28 | 8 << 24 | 0 << 20 | 0 << 19 | (!!REVISION!! & ((1 << 19) - 1));
 #ifdef __MORPHOS__
 /**
  * Variable used by MorphOS to show the version.
  */
-extern const char morphos_versions_tag[] = "$VER: OpenTTD @@VERSION@@ (@@DATE@@) OpenTTD Team [MorphOS, PowerPC]";
+extern const char morphos_versions_tag[] = "$VER: OpenTTD !!VERSION!! (!!DATE!!) OpenTTD Team [MorphOS, PowerPC]";
 #endif

0 comments (0 inline, 0 general)