Files
@ r22226:be1e000601fb
Branch filter:
Location: cpp/openttd-patchpack/source/known-bugs.txt
r22226:be1e000601fb
23.5 KiB
text/plain
(svn r27408) -Update from WebTranslator v3.0:
simplified_chinese - 9 changes by xiangyigao
simplified_chinese - 9 changes by xiangyigao
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 | OpenTTD's known bugs
Last updated: 2015-02-24
Release version: 1.5.0-beta2
------------------------------------------------------------------------
Table of contents
-----------------
1.0) About
2.0) Known bugs
1.0) About
---- -----
All bugs listed below are marked as known. Please do not submit any bugs
that are the same as these. If you do, do not act surprised, because
we WILL flame you!!
The current list of known bugs that we intend to fix can be found in our
bug tracking system at: http://bugs.openttd.org
Also check the closed bugs when searching for your bug in this system as
we might have fixed the bug in the mean time.
2.0) Known bugs
---- ----------------------------------
This section lists all known bugs that we do not intend to fix and the
reasons why we think that fixing them is infeasible. We might make some
minor improvements that reduce the scope of these bugs, but we will not
be able to completely fix them.
No suitable AI can be found
If you have no AIs and an AI is started the so-called 'dummy' AI will
be loaded. This AI does nothing but writing a message on the AI debug
window and showing a red warning. There are basically two solutions
for this problem: Either you set the number of AI players to 0 so that
no AI is started. You find that setting at the top of the window in the
"AI / Game Scripts Settings" window.
The other solution is acquiring (downloading) some AI. The easiest way
to do this is via the "Check Online Content" button in the main (intro)
menu or directly in the "AI / Game Scripts Settings" dialogue via the
"Check Online Content" button.
After a while of playing, colours get corrupted
In Windows 7 the background slideshow corrupts the colour mapping of
OpenTTD's 8bpp screen modes. Workarounds for this are:
a) Switching to windowed mode, instead of fullscreen
b) Switching off background slideshow
c) Setting up the 32bpp-anim or 32bpp-optimized blitter
Long delay between switching songs/music
On Windows there is a delay of a (few) second(s) between switching of
songs for the "win32" driver. This delay is caused by the fact that
opening a MIDI file via MCI is extremely slow.
DirectMusic, known as "dmusic" in OpenTTD, has a much shorter delay.
However, under some circumstances DirectMusic does not reset its
state properly causing wrongly pitched/bad sounding songs. This
problem is in DirectMusic as it is reproducable with Microsoft's
DirectMusic Producer. DirectMusic has been deprecated since 2004
and as such has no support for 64 bits OpenTTD.
As a delay is favourable over bad sounding music the "win32" driver
is the default driver for OpenTTD. You can change this default by
setting the "musicdriver" in your openttd.cfg to "dmusic".
Custom vehicle type name is incorrectly aligned
Some NewGRFs use sprites that are bigger than normal in the "buy
vehicle" window. Due to this they have to encode an offset for the
vehicle type name. Upon renaming the vehicle type this encoded offset
is stripped from the name because the "edit box" cannot show this
encoding. As a result the custom vehicle type names will get the
default alignment. The only way to (partly) fix this is by adding
spaces to the custom name.
Clipping problems [FS#119]
In some cases sprites are not drawn as one would expect. Examples of
this are aircraft that might be hidden below the runway or trees that
in some cases are rendered over vehicles.
The primary cause of this problem is that OpenTTD does not have enough
data (like a 3D model) to properly determine what needs to be drawn in
front of what. OpenTTD has bounding boxes but in lots of cases they
are either too big or too small and then cause problems with what
needs to be drawn in front of what. Also some visual tricks are used.
For example trains at 8 pixels high, the catenary needs to be drawn
above that. When you want to draw bridges on top of that, which are
only one height level (= 8 pixels) higher, you are getting into some
big problems.
We can not change the height levels; it would require us to either
redraw all vehicle or all landscape graphics. Doing so would mean we
leave the Transport Tycoon graphics, which in effect means OpenTTD
will not be a Transport Tycoon clone anymore.
Mouse scrolling not possible at the edges of the screen [FS#383] [FS#3966]
Scrolling the viewport with the mouse cursor at the edges of the screen
in the same direction of the edge will fail. If the cursor is near the
edge the scrolling will be very slow.
OpenTTD only receives cursor position updates when the cursor is inside
OpenTTD's window. It is not told how far you have moved the cursor
outside of OpenTTD's window.
Lost trains ignore (block) exit signals [FS#1473]
If trains are lost they ignore block exit signals, blocking junctions
with presignals. This is caused because the path finders cannot tell
where the train needs to go. As such a random direction is chosen at
each junction. This causes the trains to occasionally to make choices
that are unwanted from a player's point of view.
This will not be fixed because lost trains are in almost all cases a
network problem, e.g. a train can never reach a specific place. This
makes the impact of fixing the bug enormously small against the
amount of work needed to write a system that prevents the lost trains
from taking the wrong direction.
Vehicle owner of last transfer leg gets paid for all [FS#2427]
When you make a transfer system that switches vehicle owners. This
is only possible with 'industry stations', e.g. the oil rig station
the owner of the vehicle that does the final delivery gets paid for
the whole trip. It is not shared amongst the different vehicle
owners that have participated in transporting the cargo.
This sharing is not done because it would enormously increase the
memory and CPU usage in big games for something that is happening
in only one corner case. We think it is not worth the effort until
sharing of stations is an official feature.
Forbid 90 degree turns does not work for crossing PBS paths [FS#2737]
When you run a train through itself on a X junction with PBS turned on
the train will not obey the 'forbid 90 degree turns' setting. This is
due to the fact that we can not be sure that the setting was turned
off when the track was reserved, which means that we assume it was
turned on and that the setting does not hold at the time. We made it
this way to allow one to change the setting in-game, but it breaks
slightly when you are running your train through itself. Running a
train through means that your network is broken and is thus a user
error which OpenTTD tries to graciously handle.
Fixing this bug means that we need to record whether this particular
setting was turned on or off at the time the reservation was made. This
means adding quite a bit of data to the savegame for solving an issue
that is basically an user error. We think it is not worth the effort.
Duplicate (station) names after renaming [FS#3204]
After renaming stations one can create duplicate station names. This
is done giving a station the same custom name as another station with
an automatically generated name.
The major part of this problem is that station names are translatable.
Meaning that a station is called e.g. '<TOWN> Central' in English and
'<TOWN> Centraal' in Dutch. This means that in network games the
renaming of a town could cause the rename to succeed on some clients
and fail at others. This creates an inconsistent game state that will
be seen as a 'desync'. Secondly the custom names are intended to fall
completely outside of the '<TOWN> <name>' naming of stations, so when
you rename a town all station names are updated accordingly.
As a result the decision has been made that all custom names are only
compared to the other custom names in the same class and not compared
to the automatically generated names.
Extreme CPU usage/hangs when using SDL and PulseAudio [FS#3294]
OpenTTD hangs/freezes when closing, OpenTTD is slow, OpenTTD uses a lot of CPU
OpenTTD can be extremely slow/use a lot of CPU when the sound is
played via SDL and then through PulseAudio's ALSA wrapper. Under the
same configuration OpenTTD, or rather SDL, might hang when exiting
the game. This problem is seen most in Ubuntu 9.04 and higher.
This is because recent versions of the PulseAudio sound server are
configured to use timer-based audio scheduling rather than
interrupt-based audio scheduling. Configuring PulseAudio to force
use of interrupt-based scheduling may resolve sound problems for
some users. Under recent versions of Ubuntu Linux (9.04 and higher)
this can be accomplished by changing the following line in the
/etc/pulse/default.pa file:
load-module module-udev-detect
to
load-module module-udev-detect tsched=0
Note that PulseAudio must be restarted for changes to take effect.
Older versions of PulseAudio may use the module-hal-detect module
instead. Adding tsched=0 to the end of that line will have a similar
effect.
Another possible solution is selecting the "pulse" backend of SDL
by either using "SDL_AUDIODRIVER=pulse openttd" at the command
prompt or installing the 'libsdl1.2debian-pulseaudio' package from
Ubuntu's Universe repository. For other distributions a similar
package needs to be installed.
OpenTTD not properly resizing with SDL on X [FS#3305]
Under some X window managers OpenTTD's window does not properly
resize. You will either end up with a black bar at the right/bottom
side of the window or you cannot see the right/bottom of the window,
e.g you cannot see the status bar. The problem is that OpenTTD does
not always receive a resize event from SDL making it impossible for
OpenTTD to know that the window was resized; sometimes moving the
window will solve the problem.
Window managers that are known to exhibit this behaviour are KDE's
and GNOME's. With the XFCE's and LXDE's window managers the resize
event is sent when the user releases the mouse.
Incorrect colours, crashes upon exit, debug warnings and smears upon
window resizing with SDL on Mac OS X [FS#3447]
Video handling with (lib)SDL under Mac OS X is known to fail on some
versions of Mac OS X with some hardware configurations. Some of the
problems happen only under some circumstances whereas others are
always present.
We suggest that the SDL video/sound backend is not used for OpenTTD
in combinations with Mac OS X.
Train crashes entering same junction from block and path signals [FS#3928]
When a train has reserved a path from a path signal to a two way
block signal and the reservation passes a path signal through the
back another train can enter the reserved path (only) via that same
two way block signal.
The reason for this has to do with optimisation; to fix this issue
the signal update has to pass all path signals until it finds either
a train or a backwards facing signal. This is a very expensive task.
The (signal) setups that allow these crashes can furthermore be
considered incorrectly signalled; one extra safe waiting point for
the train entering from path signal just after the backwards facing
signal (from the path signal train) resolves the issue.
Crashes when playing music [FS#3941]
Mac OS X's QuickTime (default music driver) and Windows' MCI (win32
music driver) crash on some songs from OpenMSX. OpenTTD cannot do
anything about this. Please report these crashes to the authors of
OpenMSX so the crash causing songs can be removed or fixed.
Crashes when run in a VM using Parallels Desktop [FS#4003]
When the Windows version of OpenTTD is executed in a VM under
Parallels Desktop a privileged instruction exception may be thrown.
As OpenTTD works natively on OSX as well as natively on Windows and
these native builds both don't exhibit this behaviour this crash is
most likely due to a bug in the virtual machine, something out of
the scope of OpenTTD. Most likely this is due to Parallels Desktop
lacking support for RDTSC calls. The problem can be avoided by using
other VM-software, Wine, or running natively on OSX.
OpenTTD hangs when started on 32 bits Windows [FS#4083]
Under some circumstances OpenTTD might hang for hours on the
initialisation of the music driver. The exact circumstances are
unknown except that it is the "dmusic" music driver that has the
problem and that the "win32" music driver does not.
As a result using the "win32" music driver will work around this
issue.
As the exact circumstances are unknown, and the obvious
configuration settings related to the music driver are at their
default we are not able to detect this failure, except when Windows'
music initialisation function returns after several hours and then
there is no point in switching the music driver anymore.
The reason we still use the "win32" music driver as default are
described in the "Long delay between switching music/song" section
of this document.
Pre- and exit signals are not dragged [FS#4378]
Unlike all other signal types, the entry- and exit signals are not
dragged but instead normal signals are placed on subsequent track
sections. This is done on purpose as this is the usually more con-
venient solution. There are little to no occasions where more than
one entry or exit signal in a row are useful. This is different
for all other signal types where several in a row can serve one
purpose or another.
Station build date is incorrect [FS#4415]
The tile query tool will show the date of the last (re)construction
at the station and not the date of the first construction. This is
due to compatability reasons with NewGRFs and the fact that it is
wrong to say that the station is built in a particular year when it
was completely destroyed/rebuilt later on.
The tile query tool can be fixed by changing the "Build date" text
to "Date at which the last (re)construction took place" but this is
deemed too specific and long for that window.
Can't change volume inside OpenTTD [FS#4416]
Some backends do not provide a means to change the volume of sound
effects or music. The mixing of music and sound is left to external
libraries/the operating system we can't handle the volume control
in OpenTTD. As a result you can't change the volume inside OpenTTD
for backends such as SDL; just use the volume control provided by
your operating system.
Can't run OpenTTD with the -d option from a MSYS console [FS#4587]
The MSYS console does not allow OpenTTD to open an extra console for
debugging output. Compiling OpenTTD with the --enable-console
configure option prevents this issue and allows the -d option to use
the MSYS console for its output.
Unreadable characters for non-latin locales [FS#4607]
OpenTTD does not ship a non-latin font in its graphics files. As a
result OpenTTD needs to acquire the font from somewhere else. What
OpenTTD does is ask the operating system, or a system library, for
the best font for a given language if the currently loaded font
does not provide all characters of the chosen translation. This
means that OpenTTD has no influence over the quality of the chosen
font; it just does the best it can do.
If the text is unreadable there are several steps that you can take
to improve this. The first step is finding a good font and configure
this in the configuration file. See section 9.0 of readme.txt for
more information. You can also increase the font size to make the
characters bigger and possible better readable.
If the problem is with the clarity of the font you might want to
enable anti-aliasing by setting the small_aa/medium_aa/large_aa
settings to "true". However, anti-aliasing only works when a 32 bits
blitter has been selected, e.g. blitter = "32bpp-anim", as with the
8 bits blitter there are not enough colours to properly perform the
anti-aliasing.
(Temporary) wrong colours when switching to full screen [FS#4511]:
On Windows it can happen that you temporarily see wrong colours
when switching to full screen OpenTTD, either by starting
OpenTTD in full screen mode, changing to full screen mode or by
ALT-TAB-ing into a full screen OpenTTD. This is caused by the
fact that OpenTTD, by default, uses 8bpp paletted output. The
wrong colours you are seeing is a temporary effect of the video
driver switching to 8bpp palette mode.
This issue can be worked around in two ways:
a) Setting fullscreen_bpp to 32
b) Setting up the 32bpp-anim or 32bpp-optimized blitter
Train does not crash with itself [FS#4635]:
When a train drives in a circle the front engine passes through
wagons of the same train without crashing. This is intentional.
Signals are only aware of tracks, they do not consider the train
length and whether there would be enough room for a train in some
circle it might drive on. Also the path a train might take is not
necessarily known when passing a signal.
Checking all circumstances would take a lot of additional computational
power for signals, which is not considered worth the effort, as
it does not add anything to gameplay.
Nevertheless trains shall not crash in normal operation, so making
a train not crash with itself is the best solution for everyone.
Aircraft coming through wall in rotated airports [FS#4705]:
With rotated airports, specifically hangars, you will see that the
aircraft will show a part through the back wall of the hangar.
This can be solved by only drawing a part of the plane when being
at the back of the hangar, however then with transparency turned on
the aircraft would be shown partially which would be even weirder.
As such the current behaviour is deemed the least bad.
The same applies to overly long ships and their depots.
Vehicles not keeping their "maximum" speed [FS#4815]:
Vehicles that have not enough power to reach and maintain their
advertised maximum speed might be constantly jumping between two
speeds. This is due to the fact that speed and its calculations
are done with integral numbers instead of floating point numbers.
As a result of this a vehicle will never reach its equilibrium
between the drag/friction and propulsion. So in effect it will be
in a vicious circle of speeding up and slowing down due to being
just at the other side of the equilibrium.
Not speeding up when near the equilibrium will cause the vehicle
to never come in the neighbourhood of the equilibrium and not
slowing down when near the equilibrium will cause the vehicle
to never slow down towards the equilibrium once it has come down
a hill.
It is possible to calculate whether the equilibrium will be
passed, but then all acceleration calculations need to be done
twice.
Settings not saved when OpenTTD crashes [FS#4846]:
The settings are not saved when OpenTTD crashes for several reasons.
The most important is that the game state is broken and as such the
settings might contain invalid values, or the settings have not even
been loaded yet. This would cause invalid or totally wrong settings
to be written to the configuration file.
A solution to that would be saving the settings whenever one changes,
however due to the way the configuration file is saved this requires
a flush of the file to the disk and OpenTTD needs to wait till that
is finished. On some file system implementations this causes the
flush of all 'write-dirty' caches, which can be a significant amount
of data to be written. This can further be aggravated by spinning
down disks to conserve power, in which case this disk needs to be
spun up first. This means that many seconds may pass before the
configuration file is actually written, and all that time OpenTTD
will not be able to show any progress. Changing the way the
configuration file is saved is not an option as that leaves us more
vulnerable to corrupt configuration files.
Finally, crashes should not be happening. If they happen they should
be reported and fixed, so essentially fixing this is fixing the
wrong thing. If you really need the configuration changes to be
saved, and you need to run a version that crashes regularly, then
you can use the 'saveconfig' command in the console to save the
settings.
Not all NewGRFs, AIs, game scripts are found [FS#4887]:
Under certain situations, where the path for the content within a
tar file is the same as other content on the file system or in another
tar file, it is possible that content is not found. A more thorough
explanation and solutions are described in section 4.4 of readme.txt.
Mouse cursor going missing with SDL [FS#4997]:
Under certain circumstances SDL does not notify OpenTTD of changes
with respect to the mouse pointer, specifically whether the mouse
pointer is within the bounds of OpenTTD or not. For example, if you
Alt-tab to another application the mouse cursor will still be shown
in OpenTTD, and when you move the mouse outside of the OpenTTD
window so the cursor gets hidden, open/move another application on
top of the OpenTTD window and then Alt-tab back into OpenTTD the
cursor will not be shown.
We cannot fix this problem as SDL simply does not provide the
required information in these corner cases. This is a bug in SDL
and as such there is little that we can do about it.
Inconsistent catchment areas [FS#5661]:
Due to performance decisions the catchment area for cargo accepted
by a station for delivery to houses or industries differs from the
catchment area for cargo that is delivered to stations from houses
or industries.
Conceptually they work the same, but the effect in game differs.
They work by finding the closest destination "around" the source
which is within a certain distance. This distance depends on the
type of station, e.g. road stops have a smaller catchment area than
large airports. In both cases the bounding box, the smallest
rectangle that contains all tiles of something, is searched for the
target of the cargo, and then spiraling outwards finding the closest
tile of the target.
In the case of a station with two tiles spread far apart with a house
that is within the station's bounding box, it would be possible that
the spiraling search from the house does not reach one of the station
tiles before the search ends, i.e. all tiles within that distance
are searched. So the house does not deliver cargo to the station. On
the other hand, the station will deliver cargo because the house
falls within the bounding box, and thus search area.
It is possible to make these consistent, but then cargo from a house
to a station needs to search up to 32 tiles around itself, i.e. 64
by 64 tiles, to find all possible stations it could deliver to
instead of 10 by 10 tiles (40 times more tiles). Alternatively the
search from a station could be changed to use the actual tiles, but
that would require considering checking 10 by 10 tiles for each of
the tiles of a station, instead of just once.
Trains might not stop at platforms that are currently being changed [FS#5553]:
If you add tiles to or remove tiles from a platform while a train is
approaching to stop at the same platform, that train can miss the place
where it's supposed to stop and pass the station without stopping. This
is caused by the fact that the train is considered to already have stopped
if it's beyond its assigned stopping location. We can't let the train stop
just anywhere in the station because then it would never leave the station
if you have the same station in the order list multiple times in a row or
if there is only one station in the order list (see FS#5684).
Some houses and industries are not affected by transparency [FS#5817]:
Some of the default houses and industries (f.e. the iron ore mine) are
not affected by the transparency options. This is because the graphics do
not (completely) separate the ground from the building.
This is a bug of the original graphics, and unfortunately cannot be
fixed with OpenGFX for the sake of maintaining compatibility with the
original graphics.
|